- ON LINE - |
 |
- CATALOGUE - |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 Information & Sample Instruction Sheets |
 Back To Small Tank Loco Kits |
PROTOTYPE. This class of 30 locomotives was the final and most modern design of 0-6-0 tank loco built by the GER. Ten were fitted with condensing gear for working suburban passenger trains. Other members of the class worked throughout East Anglia and other parts of the LNER until 1961.
KIT. The body is mainly brass, all the chassis and some of the heavier body components are in nickel silver. This is a very detailed kit with a lot of small fittings, pipework, cab interior detail and a representation of slidebars between the frames. The instructions are very comprehensive with a written text describing the building step by step to complement the exploded drawings.
| Kit Reference Code CL - J68 |
Kit Price £280.00 Print Off Order Form pdf file |
- Additional Components Required to Complete -
- Motor and Gear Set -
I recommend my own 1833 motor and 40/1 gear set.
More Information About Motors
I recommend my own 1833 motor and 40/1 gear set.
More Information About Motors
- Wheels -
3 Sets 4', 10 spoke driving wheels (Slater's Catalogue Number 7848NE),
Slater’s Plastikard, Old Road, Darley Dale, Matlock, Derbyshire, DE4 2ER, Telephone 01629 734053, Fax 01629 732235.
More Information About Wheels
3 Sets 4', 10 spoke driving wheels (Slater's Catalogue Number 7848NE),
Slater’s Plastikard, Old Road, Darley Dale, Matlock, Derbyshire, DE4 2ER, Telephone 01629 734053, Fax 01629 732235.
More Information About Wheels
- Optional Plunger Electrical Pickups -
If these are desired as an alternative to the wire wiper pickups that are included in the kit. I would recommend the type produced by Slater's and provision is made in the kit chassis for fitting these (Slater's Cat No 7157).
More Information About Pickup Systems
If these are desired as an alternative to the wire wiper pickups that are included in the kit. I would recommend the type produced by Slater's and provision is made in the kit chassis for fitting these (Slater's Cat No 7157).
More Information About Pickup Systems
Approximate Cost of Completing The Model
Kit - £280 + Motor/Gears - £45 + Slaters Wheels - £84 = £409.00
Kit - £280 + Motor/Gears - £45 + Slaters Wheels - £84 = £409.00
- Download J68 Locomotive Instructions as PDF Print Off -
Downloading the instruction booklets will allow you to evaluate the kit and its construction and help you to determine its suitability for yourself and your project.
The instructions are split into three booklets, Reference Photographs and parts identification, Chassis Construction, Body Construction.
